Decontamination Robot Sanitizes Rooms in Five Minutes
|
By HospiMedica International staff writers Posted on 24 Mar 2020 |

Image: The LightStrike Germ-Zapping Robot (Photo courtesy of Xenex)
A new germ-zapping robot emits broad-spectrum ultraviolet (UV) light that disrupts the cell walls of microorganisms and causes irreparable damage.
The Xenex (San Antonio, TX, USA) LightStrike Germ-Zapping Robot uses a bulb filled with xenon gas to create intense germicidal UV light with an extensive range that includes both UV-B (280-315nm) and UV-C (200-280nm), and at an intensity thousands of times higher than mercury bulbs. The continuous UV light reduces microbial load in as little as five minutes, including methicillin-resistant Staphylococcus aureus (MRSA), Clostridium difficile, vancomycin-resistant Enterococcus (VRE), and other organisms. The robot has also been shown to reduce surgical site infection (SSI) rates.
Features include an impact resistant shell and four castors for portability; a telescopic mechanism to raise the xenon-filled bulb from its protective casing before use; a triple sensor motion detection cone to identify people are in the room, enhancing patient and staff safety; a simple user interface with auto-updating software for new features; cloud-based reporting over cellular or Wi-Fi networks; and extreme durability and reliability. After use, the room will remain disinfected until new pathogens enter the room from a visitor, patient, care provider, or the air handling system.
“A mercury light bulb is about the average intensity of a fluorescent light. Ours is 400 to 1,400 times more intense, depending on where the disinfecting spectrum is. The answer is, intensity makes all the difference,” said Morris Miller, CEO of Xenex. “It’s the difference between a hose and a power washer. A hose will put out a lot more water; but a power washer, at 18,000 pounds per square inch, will clean your sidewalk in the way that a hose won’t.”
Increasing evidence confirms that Clostridium difficile, MRSA, VRE, Acinetobacter baumannii, and influenza are transmitted via environmental surfaces, and that only 50% of environmental surfaces in a typical operating room or patient room may be effectively disinfected. The current patient’s risk of contracting a hospital acquired infection (HAI) from contaminated surfaces increases 100% when the previous room occupant had been diagnosed with an infection.
Related Links:
Xenex
The Xenex (San Antonio, TX, USA) LightStrike Germ-Zapping Robot uses a bulb filled with xenon gas to create intense germicidal UV light with an extensive range that includes both UV-B (280-315nm) and UV-C (200-280nm), and at an intensity thousands of times higher than mercury bulbs. The continuous UV light reduces microbial load in as little as five minutes, including methicillin-resistant Staphylococcus aureus (MRSA), Clostridium difficile, vancomycin-resistant Enterococcus (VRE), and other organisms. The robot has also been shown to reduce surgical site infection (SSI) rates.
Features include an impact resistant shell and four castors for portability; a telescopic mechanism to raise the xenon-filled bulb from its protective casing before use; a triple sensor motion detection cone to identify people are in the room, enhancing patient and staff safety; a simple user interface with auto-updating software for new features; cloud-based reporting over cellular or Wi-Fi networks; and extreme durability and reliability. After use, the room will remain disinfected until new pathogens enter the room from a visitor, patient, care provider, or the air handling system.
“A mercury light bulb is about the average intensity of a fluorescent light. Ours is 400 to 1,400 times more intense, depending on where the disinfecting spectrum is. The answer is, intensity makes all the difference,” said Morris Miller, CEO of Xenex. “It’s the difference between a hose and a power washer. A hose will put out a lot more water; but a power washer, at 18,000 pounds per square inch, will clean your sidewalk in the way that a hose won’t.”
Increasing evidence confirms that Clostridium difficile, MRSA, VRE, Acinetobacter baumannii, and influenza are transmitted via environmental surfaces, and that only 50% of environmental surfaces in a typical operating room or patient room may be effectively disinfected. The current patient’s risk of contracting a hospital acquired infection (HAI) from contaminated surfaces increases 100% when the previous room occupant had been diagnosed with an infection.
Related Links:
Xenex
Latest Critical Care News
- Noninvasive Monitoring Device Enables Earlier Intervention in Heart Failure
- Automated IV Labeling Solution Improves Infusion Safety and Efficiency
- First-Of-Its-Kind AI Tool Detects Pulmonary Hypertension from Standard ECGs
- 4D Digital Twin Heart Model Improves CRT Outcomes
- AI Turns Glucose Data Into Actionable Insights for Diabetes Care
- Microscale Wireless Implant Tracks Brain Activity Over Time
- Smart Mask Delivers Continuous, Battery-Free Breath Monitoring
- Routine Blood Pressure Readings May Identify Risk of Future Cognitive Decline
- CGM-Based Algorithm Enhances Insulin Dose Adjustment in Type 2 Diabetes
- Fish Scale–Based Implants Offer New Approach to Corneal Repair
- Dual-Function Wound Patch Combines Infection Sensing and Treatment
- Smartwatch Signals and Blood Tests Team Up for Early Warning on Insulin Resistance
- Smart Fabric Technology Aims to Prevent Pressure Injuries in Hospital Care
- Standardized Treatment Algorithm Improves Blood Pressure Control
- Combined Infection Control Strategy Limits Drug-Resistant Outbreak in NICU
- AI Helps Predict Which Heart-Failure Patients Will Worsen Within a Year
Channels
Artificial Intelligence
view channelAI Analysis of Pericardial Fat Refines Long-Term Heart Disease Risk
Accurately identifying long-term cardiovascular disease risk in asymptomatic adults remains challenging for clinicians. Missed or underestimated risk delays preventive therapy and increases the chance... Read more
Machine Learning Approach Enhances Liver Cancer Risk Stratification
Hepatocellular carcinoma, the most common form of primary liver cancer, is often detected late despite targeted surveillance programs. Current screening guidelines emphasize patients with known cirrhosis,... Read moreSurgical Techniques
view channel
Ultrasound Technology Aims to Replace Invasive BPH Procedures
Benign prostatic hyperplasia (BPH) is a frequent cause of lower urinary tract symptoms in aging men and often requires invasive procedures or prolonged recovery. With prevalence expected to rise as populations... Read more
Continuous Monitoring with Wearables Enhances Postoperative Patient Safety
Postoperative hypoxemia on general surgical wards is common and often missed by intermittent vital sign checks. Undetected low oxygen levels can delay recovery and raise the risk of complications that... Read morePatient Care
view channel
Wearable Sleep Data Predict Adherence to Pulmonary Rehabilitation
Chronic obstructive pulmonary disease (COPD) is a long-term lung disorder that makes breathing difficult and often disturbs sleep, reducing energy for daily activities. Limited engagement in pulmonary... Read more
Revolutionary Automatic IV-Line Flushing Device to Enhance Infusion Care
More than 80% of in-hospital patients receive intravenous (IV) therapy. Every dose of IV medicine delivered in a small volume (<250 mL) infusion bag should be followed by subsequent flushing to ensure... Read moreHealth IT
view channel
EMR-Based Tool Predicts Graft Failure After Kidney Transplant
Kidney transplantation offers patients with end-stage kidney disease longer survival and better quality of life than dialysis, yet graft failure remains a major challenge. Although a successful transplant... Read more
Printable Molecule-Selective Nanoparticles Enable Mass Production of Wearable Biosensors
The future of medicine is likely to focus on the personalization of healthcare—understanding exactly what an individual requires and delivering the appropriate combination of nutrients, metabolites, and... Read moreBusiness
view channel







