Study Proposes New Guidelines to Design Mechanical Ventilators That Can Work in Low- and Middle-Income Countries
|
By HospiMedica International staff writers Posted on 10 Feb 2022 |

A study has proposed essential new guidelines to design mechanical ventilators that can work in low- and middle-income countries (LMICs).
The guidelines are based on the results of an original survey led by King’s College London (London, UK) of more than 50 expert anesthetists and intensivists from 23 LMICs in Africa, Asia, Central and South America, and on a critical analysis of the published literature. The findings of the study are vital for countries that have few mechanical ventilators, as low ventilation capacity limits access to critical care and surgery. The guidelines have been produced to define the key design features for a mechanical ventilator to be usable and sustainable in low-resource settings.
The COVID-19 pandemic has highlighted the lack of ventilators in many LMICs, and this study sought to characterize the infrastructure in which ventilators are needed. Ventilators produced for high income countries might not be sustainable in LMICs, because they may be too difficult or expensive to repair. The survey responses by larger LMICs hospitals showed electricity supply was interrupted daily (19%) and weekly (25%), although three quarters of these outages lasted less than two hours. As such, a relatively small battery in the ventilator could bridge the gaps in electricity availability. The study suggests that the design of a mechanical ventilator would also need to include an air compressor, and either a gas cylinder or an oxygen concentrator. The analysis also highlighted the existence of a wide range of infrastructure within low- and middle-income countries. A ventilator developed according to these guidelines, is likely to meet the demand in many of these countries.
“The pandemic highlighted the lack of mechanical ventilation capacity in many low and middle-income countries, where the use of ventilators designed for wealthier countries is not sustainable for technical and financial reasons,” said Dr. Federico Formenti, Reader in Physiology, from the School of Basic & Medical Biosciences. “Our study systematically investigated the infrastructure and context where ventilators are required and, based on a survey and expert opinion, we identified the fundamental guidelines that could enable the design of a context-specific and sustainable mechanical ventilator for larger hospitals in LMICs.”
“The global unreliability of electric power supply in low- and middle-income countries calls for designs of medical commodities and equipment to be customized,” said Dr. Mpoki Ulisubisya, Permanent Secretary at the Ministry of Health in Tanzania and co-author of the study. “This customization is essential if patient care is to be optimised and of a quality to meet patient’s needs. The pandemic exacerbated this need when mechanical ventilation equipment was in question hence this study and the raised recommendations for equipment meant for low- and middle-income countries.”
“COVID19 pandemic has highlighted the dearth of respiratory support equipment in low resource countries,” added co-author Professor Madiha Hashmi, from Ziauddin University in Pakistan. “Even when available these complex machines are unable to save lives when operated by untrained persons. Simple ventilators with auto-modes may bridge the equipment and human resource gap.”
Related Links:
King’s College London
Latest COVID-19 News
- Low-Cost System Detects SARS-CoV-2 Virus in Hospital Air Using High-Tech Bubbles
- World's First Inhalable COVID-19 Vaccine Approved in China
- COVID-19 Vaccine Patch Fights SARS-CoV-2 Variants Better than Needles
- Blood Viscosity Testing Can Predict Risk of Death in Hospitalized COVID-19 Patients
- ‘Covid Computer’ Uses AI to Detect COVID-19 from Chest CT Scans
- MRI Lung-Imaging Technique Shows Cause of Long-COVID Symptoms
- Chest CT Scans of COVID-19 Patients Could Help Distinguish Between SARS-CoV-2 Variants
- Specialized MRI Detects Lung Abnormalities in Non-Hospitalized Long COVID Patients
- AI Algorithm Identifies Hospitalized Patients at Highest Risk of Dying From COVID-19
- Sweat Sensor Detects Key Biomarkers That Provide Early Warning of COVID-19 and Flu
- Study Assesses Impact of COVID-19 on Ventilation/Perfusion Scintigraphy
- CT Imaging Study Finds Vaccination Reduces Risk of COVID-19 Associated Pulmonary Embolism
- Third Day in Hospital a ‘Tipping Point’ in Severity of COVID-19 Pneumonia
- Longer Interval Between COVID-19 Vaccines Generates Up to Nine Times as Many Antibodies
- AI Model for Monitoring COVID-19 Predicts Mortality Within First 30 Days of Admission
- AI Predicts COVID Prognosis at Near-Expert Level Based Off CT Scans
Channels
Surgical Techniques
view channel
Novel Glue Prevents Complications After Breast Cancer Surgery
Seroma and prolonged lymphorrhea are among the most common complications following axillary lymphadenectomy in breast cancer patients. These postoperative issues can delay recovery and postpone the start... Read more
Breakthrough Brain Implant Enables Safer and More Precise Drug Delivery
Delivering medication directly to specific regions of the brain has long been a major challenge in treating neurological disorders. Current implants and infusion systems typically reach only one or two... Read morePatient Care
view channel
Revolutionary Automatic IV-Line Flushing Device to Enhance Infusion Care
More than 80% of in-hospital patients receive intravenous (IV) therapy. Every dose of IV medicine delivered in a small volume (<250 mL) infusion bag should be followed by subsequent flushing to ensure... Read more
VR Training Tool Combats Contamination of Portable Medical Equipment
Healthcare-associated infections (HAIs) impact one in every 31 patients, cause nearly 100,000 deaths each year, and cost USD 28.4 billion in direct medical expenses. Notably, up to 75% of these infections... Read more
Portable Biosensor Platform to Reduce Hospital-Acquired Infections
Approximately 4 million patients in the European Union acquire healthcare-associated infections (HAIs) or nosocomial infections each year, with around 37,000 deaths directly resulting from these infections,... Read moreFirst-Of-Its-Kind Portable Germicidal Light Technology Disinfects High-Touch Clinical Surfaces in Seconds
Reducing healthcare-acquired infections (HAIs) remains a pressing issue within global healthcare systems. In the United States alone, 1.7 million patients contract HAIs annually, leading to approximately... Read moreHealth IT
view channel
Printable Molecule-Selective Nanoparticles Enable Mass Production of Wearable Biosensors
The future of medicine is likely to focus on the personalization of healthcare—understanding exactly what an individual requires and delivering the appropriate combination of nutrients, metabolites, and... Read moreBusiness
view channel
Philips and Masimo Partner to Advance Patient Monitoring Measurement Technologies
Royal Philips (Amsterdam, Netherlands) and Masimo (Irvine, California, USA) have renewed their multi-year strategic collaboration, combining Philips’ expertise in patient monitoring with Masimo’s noninvasive... Read more
B. Braun Acquires Digital Microsurgery Company True Digital Surgery
The high-end microsurgery market in neurosurgery, spine, and ENT is undergoing a significant transformation. Traditional analog microscopes are giving way to digital exoscopes, which provide improved visualization,... Read more
CMEF 2025 to Promote Holistic and High-Quality Development of Medical and Health Industry
The 92nd China International Medical Equipment Fair (CMEF 2025) Autumn Exhibition is scheduled to be held from September 26 to 29 at the China Import and Export Fair Complex (Canton Fair Complex) in Guangzhou.... Read more








