Miniaturized Device Monitors Blood Metabolites in ICU
By HospiMedica International staff writers Posted on 03 Nov 2015 |
Image: The prototype microfluidic metabolite device (Photo courtesy of EPFL).
A miniaturized microfluidic device could allow healthcare workers to monitor key metabolites in real time in intensive care units (ICUs).
Developed by researchers at Ecole Polytechnique Fédérale de Lausanne (EPFL; Switzerland) the device consists of a little black box with embedded biosensors that is attached to a patient’s drainage tube. The prototype device, fabricated using a three dimensional (3-D) printer, can currently monitor real time levels of glucose, lactate, bilirubin, calcium, and potassium. Eventually, according to the researchers, up to 40 different molecules could be monitored using the device, thus reducing the need for additional diagnostic devices.
The prototype includes a fully integrated hardware platform on a printed circuit board (PCB) that connects the biosensors to a read-out on the front end, as well as wireless connectivity via a Bluetooth module for data transmission to a mobile Android interface for visualization. Preliminary in vitro tests on calibration for the five key metabolites of interest were conducted successfully on rodents. A study describing the device and the results was presented at the annual Biomedical Circuits and Systems Conference (BioCAS), held during October 2015 in Atlanta (GA, USA).
“We embedded biosensors in it to measure several different substances in the blood or blood serum along with an array of electronics to transmit the results in real time to a tablet via Bluetooth,” said study presenter Sandro Carrara, PhD, a scientist at the EPFL integrated systems laboratory (LSI). “Nowadays, several of these levels are measured periodically. But in some cases, any change in level calls for an immediate response, something that is not possible with the existing systems.”
Microfluidics intersects engineering, physics, chemistry, biochemistry, nanotechnology, and biotechnology, in order to process low volumes of fluid for multiplexing, automation, and high-throughput screening. Behavior, control, and manipulation of the fluids is geometrically constrained to a small, typically submillimeter, scale using passive fluid control techniques, such as capillary forces. Often processes which are normally carried out in a lab are miniaturized on a single chip in order to enhance efficiency and mobility, as well as reducing sample and reagent volumes.
Related Links:
Ecole Polytechnique Fédérale de Lausanne
Developed by researchers at Ecole Polytechnique Fédérale de Lausanne (EPFL; Switzerland) the device consists of a little black box with embedded biosensors that is attached to a patient’s drainage tube. The prototype device, fabricated using a three dimensional (3-D) printer, can currently monitor real time levels of glucose, lactate, bilirubin, calcium, and potassium. Eventually, according to the researchers, up to 40 different molecules could be monitored using the device, thus reducing the need for additional diagnostic devices.
The prototype includes a fully integrated hardware platform on a printed circuit board (PCB) that connects the biosensors to a read-out on the front end, as well as wireless connectivity via a Bluetooth module for data transmission to a mobile Android interface for visualization. Preliminary in vitro tests on calibration for the five key metabolites of interest were conducted successfully on rodents. A study describing the device and the results was presented at the annual Biomedical Circuits and Systems Conference (BioCAS), held during October 2015 in Atlanta (GA, USA).
“We embedded biosensors in it to measure several different substances in the blood or blood serum along with an array of electronics to transmit the results in real time to a tablet via Bluetooth,” said study presenter Sandro Carrara, PhD, a scientist at the EPFL integrated systems laboratory (LSI). “Nowadays, several of these levels are measured periodically. But in some cases, any change in level calls for an immediate response, something that is not possible with the existing systems.”
Microfluidics intersects engineering, physics, chemistry, biochemistry, nanotechnology, and biotechnology, in order to process low volumes of fluid for multiplexing, automation, and high-throughput screening. Behavior, control, and manipulation of the fluids is geometrically constrained to a small, typically submillimeter, scale using passive fluid control techniques, such as capillary forces. Often processes which are normally carried out in a lab are miniaturized on a single chip in order to enhance efficiency and mobility, as well as reducing sample and reagent volumes.
Related Links:
Ecole Polytechnique Fédérale de Lausanne
Latest Critical Care News
- Powerful AI Risk Assessment Tool Predicts Outcomes in Heart Failure Patients
- Peptide-Based Hydrogels Repair Damaged Organs and Tissues On-The-Spot
- One-Hour Endoscopic Procedure Could Eliminate Need for Insulin for Type 2 Diabetes
- AI Can Prioritize Emergency Department Patients Requiring Urgent Treatment
- AI to Improve Diagnosis of Atrial Fibrillation
- Stretchable Microneedles to Help In Accurate Tracking of Abnormalities and Identifying Rapid Treatment
- Machine Learning Tool Identifies Rare, Undiagnosed Immune Disorders from Patient EHRs
- On-Skin Wearable Bioelectronic Device Paves Way for Intelligent Implants
- First-Of-Its-Kind Dissolvable Stent to Improve Outcomes for Patients with Severe PAD
- AI Brain-Age Estimation Technology Uses EEG Scans to Screen for Degenerative Diseases
- Wheeze-Counting Wearable Device Monitors Patient's Breathing In Real Time
- Wearable Multiplex Biosensors Could Revolutionize COPD Management
- New Low-Energy Defibrillation Method Controls Cardiac Arrhythmias
- New Machine Learning Models Help Predict Heart Disease Risk in Women
- Deep-Learning Model Predicts Arrhythmia 30 Minutes before Onset
- Breakthrough Technology Combines Detection and Treatment of Nerve-Related Disorders in Single Procedure