Sugar-Based Stents Facilitate Vascular Anastomosis
By HospiMedica International staff writers Posted on 30 Jan 2019 |
Image: A spiral-shaped printed stent helps surgeons stich arteries back together (Photo courtesy of UNL).
A new study describes how dissolvable sugar‐based stents can be fabricated using additive printing to help surgeons improve microvascular anastomosis.
Developed by researchers at the University of Nebraska (UNL; Lincoln, USA), Brigham and Women’s Hospital (BWH; Boston, MA, USA), Shiraz University (Iran), and other institutions, the 3D printed, sugar‐based stents are designed to hold the blood vessels together during the anastomosis suturing procedure, dissolving upon restoration of the blood flow. The dissolution rate and the mechanical properties of the dissolvable stents can be tailored between four and eight minutes.
To enable manufacture of stents with desirable geometries and dimensions, the researchers developed a molten sugary ink that is fluid enough to print, but viscous enough to solidify in minutes. Dextran, a glucose derivative, provides the necessary flexibility, so that the stent is not brittle; glucose is used to provide the adhesive properties that bind the stent to the arteries; and a combination of sucrose and sodium citrate help combat blood clotting. Once printed, the sugar-based concoction is baked until most of the water evaporated.
For the study, the researchers experimented with transparent tubing and pig arteries, showing that the stent erodes quickly but steadily when subjected to the flow rate, temperature, and salinity, of human arteries. The suturing held up with no signs of leakage immediately following the surgical procedure. The researchers plan to test the stent's use in live animal arteries, and envision a future in which such stents are printed on site at hospitals within minutes to meet the needs of individual patients. The study was published in the December 2018 issue of Advanced Healthcare Materials.
“The small sugar-based tube fits inside the adjacent ends of a clipped artery. By sticking to the interiors, the stent holds those ends in place and provides structural support during the precarious sewing process,” explained corresponding author mechanical engineer Ali Tamayol, PhD, of UNL. “The stent also reduces the risk of a surgeon mistakenly threading through both the top and bottom walls of an artery, which blocks subsequent blood flow. Sugar is bad; but here we found an application in which it's good.”
Successful microvascular anastomosis depends upon magnification, special instrumentation and fine suture materials, and the surgeon's skill. The key points of one-millimeter vessel anastomosis are the wall-to-wall coaptation of the vessel ends and a low number of interrupted stitches with relatively loose knot. To gain good coaptation, an oblique insertion of a needle through the vessel wall must be used. In a thin-walled vein repair, the lumen should always be kept open with frequent irrigations.
Related Links:
University of Nebraska
Brigham and Women’s Hospital
Shiraz University
Developed by researchers at the University of Nebraska (UNL; Lincoln, USA), Brigham and Women’s Hospital (BWH; Boston, MA, USA), Shiraz University (Iran), and other institutions, the 3D printed, sugar‐based stents are designed to hold the blood vessels together during the anastomosis suturing procedure, dissolving upon restoration of the blood flow. The dissolution rate and the mechanical properties of the dissolvable stents can be tailored between four and eight minutes.
To enable manufacture of stents with desirable geometries and dimensions, the researchers developed a molten sugary ink that is fluid enough to print, but viscous enough to solidify in minutes. Dextran, a glucose derivative, provides the necessary flexibility, so that the stent is not brittle; glucose is used to provide the adhesive properties that bind the stent to the arteries; and a combination of sucrose and sodium citrate help combat blood clotting. Once printed, the sugar-based concoction is baked until most of the water evaporated.
For the study, the researchers experimented with transparent tubing and pig arteries, showing that the stent erodes quickly but steadily when subjected to the flow rate, temperature, and salinity, of human arteries. The suturing held up with no signs of leakage immediately following the surgical procedure. The researchers plan to test the stent's use in live animal arteries, and envision a future in which such stents are printed on site at hospitals within minutes to meet the needs of individual patients. The study was published in the December 2018 issue of Advanced Healthcare Materials.
“The small sugar-based tube fits inside the adjacent ends of a clipped artery. By sticking to the interiors, the stent holds those ends in place and provides structural support during the precarious sewing process,” explained corresponding author mechanical engineer Ali Tamayol, PhD, of UNL. “The stent also reduces the risk of a surgeon mistakenly threading through both the top and bottom walls of an artery, which blocks subsequent blood flow. Sugar is bad; but here we found an application in which it's good.”
Successful microvascular anastomosis depends upon magnification, special instrumentation and fine suture materials, and the surgeon's skill. The key points of one-millimeter vessel anastomosis are the wall-to-wall coaptation of the vessel ends and a low number of interrupted stitches with relatively loose knot. To gain good coaptation, an oblique insertion of a needle through the vessel wall must be used. In a thin-walled vein repair, the lumen should always be kept open with frequent irrigations.
Related Links:
University of Nebraska
Brigham and Women’s Hospital
Shiraz University
SARS‑CoV‑2/Flu A/Flu B/RSV Sample-To-Answer Test
SARS‑CoV‑2/Flu A/Flu B/RSV Cartridge (CE-IVD)
Latest Surgical Techniques News
- Miniaturized Ultrasonic Scalpel Enables Faster and Safer Robotic-Assisted Surgery
- AI Assisted Reading Tool for Small Bowel Video Capsule Endoscopy Detects More Lesions
- First-Ever Contact Force Pulsed Field Ablation System to Transform Treatment of Ventricular Arrhythmias
- Caterpillar Robot with Built-In Steering System Crawls Easily Through Loops and Bends
- Tiny Wraparound Electronic Implants to Revolutionize Treatment of Spinal Cord Injuries
- Small, Implantable Cardiac Pump to Help Children Awaiting Heart Transplant
- Gastrointestinal Imaging Capsule a Game-Changer in Esophagus Surveillance and Treatment
- World’s Smallest Laser Probe for Brain Procedures Facilitates Ablation of Full Range of Targets
- Artificial Intelligence Broadens Diagnostic Abilities of Conventional Coronary Angiography
- AI-Powered Surgical Visualization Tool Supports Surgeons' Visual Recognition in Real Time
- Cutting-Edge Robotic Bronchial Endoscopic System Provides Prompt Intervention during Emergencies
- Handheld Device for Fluorescence-Guided Surgery a Game Changer for Removal of High-Grade Glioma Brain Tumors
- Porous Gel Sponge Facilitates Rapid Hemostasis and Wound Healing
- Novel Rigid Endoscope System Enables Deep Tissue Imaging During Surgery
- Robotic Nerve ‘Cuffs’ Could Treat Various Neurological Conditions
- Flexible Microdisplay Visualizes Brain Activity in Real-Time To Guide Neurosurgeons