Reusable Face Mask Could Help Remedy Worldwide Shortage
By HospiMedica International staff writers Posted on 30 Mar 2020 |
Image: Professor Kim Il-doo demonstrating his mask (Photo courtesy of KAIST)
A novel nano-filter face mask that maintains excellent filtration efficiency, even after multiple washing cycles, could help alleviate global supply shortages.
Developed at the Korea Advanced Institute of Science and Technology (KAIST; Daejeon, Republic of Korea), the nano-fiber mask is manufactured via an insulation block electrospinning process that fabricates orthogonal nanofibers with a diameter of 100~500 nm by controlling their spatial alignment. The unidirectional nanofiber structure can thus minimize air pressure delivery toward the filter and maximize filtration efficiency.
Existing masks fail to maintain air filtration since their electrostatic function disappears when exposed to water. In contrast to these disposable masks, which lack nano-fibers, the new masks are water resistant, with no deformation in the nano-membrane structure, even following 20 repeated hand washes, and despite soaking the masks in an ethanol solution for more than three hours. In addition, following 20 repeated bactericidal tests, the nano-fiber mask still exhibited more than 94% filtering efficiency. The reusable face mask could thus help relieve the challenges arising from the supply shortage of disposable face masks.
“We believe that this mask can be reusable for about a month even after washing in ethanol. The inner filter can also be replaced. This technology will solve the mask scarcity issue and environmental impact of mask waste,” said professor of materials science and engineering Il-Doo Kim, PhD. “We found that the mask filters out up to eighty percent of 600-nanometer particles, even after undergoing a bending test more than 4,000 times.”
Past experiences with severe acute respiratory syndrome (SARS), H1N1 swine influenza, and Middle East respiratory syndrome (MERS) indicate that surgical masks have been most widely adopted by the public as personal protective measure, despite controversy on their effectiveness. The most common face masks are disposable ones, originally made for filtering out up to 94 or 95 percent of fine dust, referred to as N94 or N95 masks.
Related Links:
Korea Advanced Institute of Science and Technology
Developed at the Korea Advanced Institute of Science and Technology (KAIST; Daejeon, Republic of Korea), the nano-fiber mask is manufactured via an insulation block electrospinning process that fabricates orthogonal nanofibers with a diameter of 100~500 nm by controlling their spatial alignment. The unidirectional nanofiber structure can thus minimize air pressure delivery toward the filter and maximize filtration efficiency.
Existing masks fail to maintain air filtration since their electrostatic function disappears when exposed to water. In contrast to these disposable masks, which lack nano-fibers, the new masks are water resistant, with no deformation in the nano-membrane structure, even following 20 repeated hand washes, and despite soaking the masks in an ethanol solution for more than three hours. In addition, following 20 repeated bactericidal tests, the nano-fiber mask still exhibited more than 94% filtering efficiency. The reusable face mask could thus help relieve the challenges arising from the supply shortage of disposable face masks.
“We believe that this mask can be reusable for about a month even after washing in ethanol. The inner filter can also be replaced. This technology will solve the mask scarcity issue and environmental impact of mask waste,” said professor of materials science and engineering Il-Doo Kim, PhD. “We found that the mask filters out up to eighty percent of 600-nanometer particles, even after undergoing a bending test more than 4,000 times.”
Past experiences with severe acute respiratory syndrome (SARS), H1N1 swine influenza, and Middle East respiratory syndrome (MERS) indicate that surgical masks have been most widely adopted by the public as personal protective measure, despite controversy on their effectiveness. The most common face masks are disposable ones, originally made for filtering out up to 94 or 95 percent of fine dust, referred to as N94 or N95 masks.
Related Links:
Korea Advanced Institute of Science and Technology
Latest Critical Care News
- Stretchable Microneedles to Help In Accurate Tracking of Abnormalities and Identifying Rapid Treatment
- Machine Learning Tool Identifies Rare, Undiagnosed Immune Disorders from Patient EHRs
- On-Skin Wearable Bioelectronic Device Paves Way for Intelligent Implants
- First-Of-Its-Kind Dissolvable Stent to Improve Outcomes for Patients with Severe PAD
- AI Brain-Age Estimation Technology Uses EEG Scans to Screen for Degenerative Diseases
- Wheeze-Counting Wearable Device Monitors Patient's Breathing In Real Time
- Wearable Multiplex Biosensors Could Revolutionize COPD Management
- New Low-Energy Defibrillation Method Controls Cardiac Arrhythmias
- New Machine Learning Models Help Predict Heart Disease Risk in Women
- Deep-Learning Model Predicts Arrhythmia 30 Minutes before Onset
- Breakthrough Technology Combines Detection and Treatment of Nerve-Related Disorders in Single Procedure
- Plasma Irradiation Promotes Faster Bone Healing
- New Device Treats Acute Kidney Injury from Sepsis
- Study Confirms Safety of DCB-Only Strategy for Treating De Novo Left Main Coronary Artery Disease
- Revascularization Improves Quality of Life for Patients with Chronic Limb Threatening Ischemia
- AI-Driven Prediction Models Accurately Predict Critical Care Patient Deterioration