New Method Uses Simple Algebraic Equations to Enable Faster Processing of Large Volumes of COVID-19 Tests
By HospiMedica International staff writers Posted on 09 Oct 2020 |

Illustration
A mathematician from Cardiff University has developed a new method for processing large volumes of COVID-19 tests which he believes could lead to significantly more tests being performed at once and results being returned much quicker.
Dr. Usama Kadri, from the Cardiff University’s School of Mathematics (Cardiff, UK), believes the new technique could allow many more patients to be tested using the same amount of tests tubes and with a lower possibility of false negatives occurring. Dr Kadri’s technique uses simple algebraic equations to identify positive samples in tests and takes advantage of a testing technique known as ‘pooling’. Pooling involves grouping a large number of samples from different patients into one test tube and performing a single test on that tube. If the tube is returned negative then you know that everybody from that group does not have the virus. Pooling can be applied by laboratories to test more samples in a shorter space of time, and works well when the overall infection rate in a certain population is expected to be low.
If a tube is returned positive then each person within that group needs to be tested once again, this time individually, to determine who has the virus. In this instance, and particularly when it is known that infection rates in the population are high, the savings from the pooling technique in terms of time and cost become less significant. However, Dr. Kadri’s new technique removes the need to perform a second round of tests once a batch is returned positive and can identify the individuals who have the virus using simple equations. The technique works with a fixed number of individuals and test tubes, for example 200 individuals and 10 test tubes, and starts by taking a fixed number of samples from a single individual, for example 5, and distributing these into 5 of the 10 test tubes.
Another 5 samples are taken from the second individual and these are distributed into a different combination of 5 of the 10 tubes. This is then repeated for each of the 200 individuals in the group so that no individual shares the same combination of tubes. Each of the 10 test tubes is then sent for testing and any tube that returns negative indicates that all patients that have samples in that tube must be negative. If only one individual has the virus, then the combinations of the tubes that return positive, which is unique to the individual, will directly indicate that individual. However, if the number of positive tubes is larger than the number of samples from each individual, in this example 5, then there should be at least two individuals with the virus. The individuals that have all of their test tubes return positive are then selected.
The method assumes that each individual that is positive should have the same quantity of virus in each tube, and that each of the individuals testing positive will have a unique quantity of virus in their sample which is different to the others. From this, the method then assumes that there are exactly two individuals with the virus and, for every two suspected individuals, a computer is used to calculate any combination of virus quantity that would return the actual overall quantity of virus that was measured in the tests. If the right combination is found then the selected two individuals have to be positive and no one else. Otherwise, the procedure is repeated but with an additional suspected individual, and so on until the right combination is found. So far, the method has been assessed using simulations of testing scenarios and Dr. Kadri acknowledges that lab testing will need to be carried out to increase confidence in the proposed method. Moreover, for clinical use, additional factors need to be considered including sample types, viral load, prevalence, and inhibitor substances.
“Applying the proposed method allows testing many more patients using the same number of testing tubes, where all positives are identified with no false negatives, and no need for a second round of independent testing, with the effective testing time reduced drastically,” Dr. Kadri said.
Related Links:
Cardiff University
Dr. Usama Kadri, from the Cardiff University’s School of Mathematics (Cardiff, UK), believes the new technique could allow many more patients to be tested using the same amount of tests tubes and with a lower possibility of false negatives occurring. Dr Kadri’s technique uses simple algebraic equations to identify positive samples in tests and takes advantage of a testing technique known as ‘pooling’. Pooling involves grouping a large number of samples from different patients into one test tube and performing a single test on that tube. If the tube is returned negative then you know that everybody from that group does not have the virus. Pooling can be applied by laboratories to test more samples in a shorter space of time, and works well when the overall infection rate in a certain population is expected to be low.
If a tube is returned positive then each person within that group needs to be tested once again, this time individually, to determine who has the virus. In this instance, and particularly when it is known that infection rates in the population are high, the savings from the pooling technique in terms of time and cost become less significant. However, Dr. Kadri’s new technique removes the need to perform a second round of tests once a batch is returned positive and can identify the individuals who have the virus using simple equations. The technique works with a fixed number of individuals and test tubes, for example 200 individuals and 10 test tubes, and starts by taking a fixed number of samples from a single individual, for example 5, and distributing these into 5 of the 10 test tubes.
Another 5 samples are taken from the second individual and these are distributed into a different combination of 5 of the 10 tubes. This is then repeated for each of the 200 individuals in the group so that no individual shares the same combination of tubes. Each of the 10 test tubes is then sent for testing and any tube that returns negative indicates that all patients that have samples in that tube must be negative. If only one individual has the virus, then the combinations of the tubes that return positive, which is unique to the individual, will directly indicate that individual. However, if the number of positive tubes is larger than the number of samples from each individual, in this example 5, then there should be at least two individuals with the virus. The individuals that have all of their test tubes return positive are then selected.
The method assumes that each individual that is positive should have the same quantity of virus in each tube, and that each of the individuals testing positive will have a unique quantity of virus in their sample which is different to the others. From this, the method then assumes that there are exactly two individuals with the virus and, for every two suspected individuals, a computer is used to calculate any combination of virus quantity that would return the actual overall quantity of virus that was measured in the tests. If the right combination is found then the selected two individuals have to be positive and no one else. Otherwise, the procedure is repeated but with an additional suspected individual, and so on until the right combination is found. So far, the method has been assessed using simulations of testing scenarios and Dr. Kadri acknowledges that lab testing will need to be carried out to increase confidence in the proposed method. Moreover, for clinical use, additional factors need to be considered including sample types, viral load, prevalence, and inhibitor substances.
“Applying the proposed method allows testing many more patients using the same number of testing tubes, where all positives are identified with no false negatives, and no need for a second round of independent testing, with the effective testing time reduced drastically,” Dr. Kadri said.
Related Links:
Cardiff University
Latest COVID-19 News
- Low-Cost System Detects SARS-CoV-2 Virus in Hospital Air Using High-Tech Bubbles
- World's First Inhalable COVID-19 Vaccine Approved in China
- COVID-19 Vaccine Patch Fights SARS-CoV-2 Variants Better than Needles
- Blood Viscosity Testing Can Predict Risk of Death in Hospitalized COVID-19 Patients
- ‘Covid Computer’ Uses AI to Detect COVID-19 from Chest CT Scans
- MRI Lung-Imaging Technique Shows Cause of Long-COVID Symptoms
- Chest CT Scans of COVID-19 Patients Could Help Distinguish Between SARS-CoV-2 Variants
- Specialized MRI Detects Lung Abnormalities in Non-Hospitalized Long COVID Patients
- AI Algorithm Identifies Hospitalized Patients at Highest Risk of Dying From COVID-19
- Sweat Sensor Detects Key Biomarkers That Provide Early Warning of COVID-19 and Flu
- Study Assesses Impact of COVID-19 on Ventilation/Perfusion Scintigraphy
- CT Imaging Study Finds Vaccination Reduces Risk of COVID-19 Associated Pulmonary Embolism
- Third Day in Hospital a ‘Tipping Point’ in Severity of COVID-19 Pneumonia
- Longer Interval Between COVID-19 Vaccines Generates Up to Nine Times as Many Antibodies
- AI Model for Monitoring COVID-19 Predicts Mortality Within First 30 Days of Admission
- AI Predicts COVID Prognosis at Near-Expert Level Based Off CT Scans
Channels
Critical Care
view channel
Ingestible Smart Capsule for Chemical Sensing in the Gut Moves Closer to Market
Intestinal gases are associated with several health conditions, including colon cancer, irritable bowel syndrome, and inflammatory bowel disease, and they have the potential to serve as crucial biomarkers... Read more
Novel Cannula Delivery System Enables Targeted Delivery of Imaging Agents and Drugs
Multiphoton microscopy has become an invaluable tool in neuroscience, allowing researchers to observe brain activity in real time with high-resolution imaging. A crucial aspect of many multiphoton microscopy... Read more
Novel Intrabronchial Method Delivers Cell Therapies in Critically Ill Patients on External Lung Support
Until now, administering cell therapies to patients on extracorporeal membrane oxygenation (ECMO)—a life-support system typically used for severe lung failure—has been nearly impossible.... Read moreSurgical Techniques
view channel
Intravascular Imaging for Guiding Stent Implantation Ensures Safer Stenting Procedures
Patients diagnosed with coronary artery disease, which is caused by plaque accumulation within the arteries leading to chest pain, shortness of breath, and potential heart attacks, frequently undergo percutaneous... Read more
World's First AI Surgical Guidance Platform Allows Surgeons to Measure Success in Real-Time
Surgeons have always faced challenges in measuring their progress toward surgical goals during procedures. Traditionally, obtaining measurements required stepping out of the sterile environment to perform... Read morePatient Care
view channel
Portable Biosensor Platform to Reduce Hospital-Acquired Infections
Approximately 4 million patients in the European Union acquire healthcare-associated infections (HAIs) or nosocomial infections each year, with around 37,000 deaths directly resulting from these infections,... Read more
First-Of-Its-Kind Portable Germicidal Light Technology Disinfects High-Touch Clinical Surfaces in Seconds
Reducing healthcare-acquired infections (HAIs) remains a pressing issue within global healthcare systems. In the United States alone, 1.7 million patients contract HAIs annually, leading to approximately... Read more
Surgical Capacity Optimization Solution Helps Hospitals Boost OR Utilization
An innovative solution has the capability to transform surgical capacity utilization by targeting the root cause of surgical block time inefficiencies. Fujitsu Limited’s (Tokyo, Japan) Surgical Capacity... Read more
Game-Changing Innovation in Surgical Instrument Sterilization Significantly Improves OR Throughput
A groundbreaking innovation enables hospitals to significantly improve instrument processing time and throughput in operating rooms (ORs) and sterile processing departments. Turbett Surgical, Inc.... Read moreHealth IT
view channel
Printable Molecule-Selective Nanoparticles Enable Mass Production of Wearable Biosensors
The future of medicine is likely to focus on the personalization of healthcare—understanding exactly what an individual requires and delivering the appropriate combination of nutrients, metabolites, and... Read more
Smartwatches Could Detect Congestive Heart Failure
Diagnosing congestive heart failure (CHF) typically requires expensive and time-consuming imaging techniques like echocardiography, also known as cardiac ultrasound. Previously, detecting CHF by analyzing... Read moreBusiness
view channel
Expanded Collaboration to Transform OR Technology Through AI and Automation
The expansion of an existing collaboration between three leading companies aims to develop artificial intelligence (AI)-driven solutions for smart operating rooms with sophisticated monitoring and automation.... Read more