Innovative Screw Design Increases Construct Strength
By HospiMedica International staff writers Posted on 29 Aug 2017 |
Image: The Serrato pedicle screw (Photo courtesy of Stryker).
A new pedicle screw intended for use in the non-cervical spine provides additional support during spinal fusion procedures.
The Stryker Corporation (Kalamazoo, MI, USA) Serrato Pedicle Screws accommodate a variety of rod diameters and materials to suit the patient’s needs, with features that include enhanced serrated cutting flutes, a unique dual-thread pattern with an increased number of leads for rapid insertion, and a patented buttress thread locking mechanism designed to minimize cross threading and splaying of the screw head. Serrato pedicle screws are available in both 5.5 and 6.0 mm diameters and in commercially pure titanium, titanium alloy, and Vitallium metals.
Serrato pedicle screws are intended for use with the Stryker Xia 3 Spinal System, an orthopedic spinal fusion system comprised of a variety of shapes and sizes of screws, blockers, and hooks that affix several different types of rods and connectors to vertebrae or the spinal column for purposes of stabilization, or corrective action for the treatment of acute and chronic instabilities or deformities such as degenerative disc disease, spondylolisthesis, trauma, spinal stenosis, curvatures, tumor, pseudarthrosis, and failed previous fusion.
“Pedicle screws have been used for decades with very few changes to their design,” said Bradley Paddock, president of Stryker’s Spine division. “The design innovations incorporated into Serrato reinforce our commitment to making industry-leading investments focused on providing the advanced spinal products and differentiated technologies that our surgeon customers have come to expect.”
Pedicle screws do not fixate the spinal segment, but rather act as firm anchor points that can then be connected with a rod. The screws are placed at two or three consecutive spine segments and then a short rod is used to connect the screws; this construct prevents motion at the segments that are being fused. After the bone graft grows, the screws and rods are no longer needed for stability and may be safely removed with a subsequent back surgery. However, most surgeons do not recommend removal unless the pedicle screws cause discomfort for the patient.
The Stryker Corporation (Kalamazoo, MI, USA) Serrato Pedicle Screws accommodate a variety of rod diameters and materials to suit the patient’s needs, with features that include enhanced serrated cutting flutes, a unique dual-thread pattern with an increased number of leads for rapid insertion, and a patented buttress thread locking mechanism designed to minimize cross threading and splaying of the screw head. Serrato pedicle screws are available in both 5.5 and 6.0 mm diameters and in commercially pure titanium, titanium alloy, and Vitallium metals.
Serrato pedicle screws are intended for use with the Stryker Xia 3 Spinal System, an orthopedic spinal fusion system comprised of a variety of shapes and sizes of screws, blockers, and hooks that affix several different types of rods and connectors to vertebrae or the spinal column for purposes of stabilization, or corrective action for the treatment of acute and chronic instabilities or deformities such as degenerative disc disease, spondylolisthesis, trauma, spinal stenosis, curvatures, tumor, pseudarthrosis, and failed previous fusion.
“Pedicle screws have been used for decades with very few changes to their design,” said Bradley Paddock, president of Stryker’s Spine division. “The design innovations incorporated into Serrato reinforce our commitment to making industry-leading investments focused on providing the advanced spinal products and differentiated technologies that our surgeon customers have come to expect.”
Pedicle screws do not fixate the spinal segment, but rather act as firm anchor points that can then be connected with a rod. The screws are placed at two or three consecutive spine segments and then a short rod is used to connect the screws; this construct prevents motion at the segments that are being fused. After the bone graft grows, the screws and rods are no longer needed for stability and may be safely removed with a subsequent back surgery. However, most surgeons do not recommend removal unless the pedicle screws cause discomfort for the patient.
Latest Surgical Techniques News
- Miniaturized Implantable Multi-Sensors Device to Monitor Vessels Health
- Tiny Robots Made Out Of Carbon Could Conduct Colonoscopy, Pelvic Exam or Blood Test
- Miniaturized Ultrasonic Scalpel Enables Faster and Safer Robotic-Assisted Surgery
- AI Assisted Reading Tool for Small Bowel Video Capsule Endoscopy Detects More Lesions
- First-Ever Contact Force Pulsed Field Ablation System to Transform Treatment of Ventricular Arrhythmias
- Caterpillar Robot with Built-In Steering System Crawls Easily Through Loops and Bends
- Tiny Wraparound Electronic Implants to Revolutionize Treatment of Spinal Cord Injuries
- Small, Implantable Cardiac Pump to Help Children Awaiting Heart Transplant
- Gastrointestinal Imaging Capsule a Game-Changer in Esophagus Surveillance and Treatment
- World’s Smallest Laser Probe for Brain Procedures Facilitates Ablation of Full Range of Targets
- Artificial Intelligence Broadens Diagnostic Abilities of Conventional Coronary Angiography
- AI-Powered Surgical Visualization Tool Supports Surgeons' Visual Recognition in Real Time
- Cutting-Edge Robotic Bronchial Endoscopic System Provides Prompt Intervention during Emergencies
- Handheld Device for Fluorescence-Guided Surgery a Game Changer for Removal of High-Grade Glioma Brain Tumors
- Porous Gel Sponge Facilitates Rapid Hemostasis and Wound Healing
- Novel Rigid Endoscope System Enables Deep Tissue Imaging During Surgery