Decontamination Robot Sanitizes Rooms in Five Minutes
By HospiMedica International staff writers Posted on 24 Mar 2020 |
Image: The LightStrike Germ-Zapping Robot (Photo courtesy of Xenex)
A new germ-zapping robot emits broad-spectrum ultraviolet (UV) light that disrupts the cell walls of microorganisms and causes irreparable damage.
The Xenex (San Antonio, TX, USA) LightStrike Germ-Zapping Robot uses a bulb filled with xenon gas to create intense germicidal UV light with an extensive range that includes both UV-B (280-315nm) and UV-C (200-280nm), and at an intensity thousands of times higher than mercury bulbs. The continuous UV light reduces microbial load in as little as five minutes, including methicillin-resistant Staphylococcus aureus (MRSA), Clostridium difficile, vancomycin-resistant Enterococcus (VRE), and other organisms. The robot has also been shown to reduce surgical site infection (SSI) rates.
Features include an impact resistant shell and four castors for portability; a telescopic mechanism to raise the xenon-filled bulb from its protective casing before use; a triple sensor motion detection cone to identify people are in the room, enhancing patient and staff safety; a simple user interface with auto-updating software for new features; cloud-based reporting over cellular or Wi-Fi networks; and extreme durability and reliability. After use, the room will remain disinfected until new pathogens enter the room from a visitor, patient, care provider, or the air handling system.
“A mercury light bulb is about the average intensity of a fluorescent light. Ours is 400 to 1,400 times more intense, depending on where the disinfecting spectrum is. The answer is, intensity makes all the difference,” said Morris Miller, CEO of Xenex. “It’s the difference between a hose and a power washer. A hose will put out a lot more water; but a power washer, at 18,000 pounds per square inch, will clean your sidewalk in the way that a hose won’t.”
Increasing evidence confirms that Clostridium difficile, MRSA, VRE, Acinetobacter baumannii, and influenza are transmitted via environmental surfaces, and that only 50% of environmental surfaces in a typical operating room or patient room may be effectively disinfected. The current patient’s risk of contracting a hospital acquired infection (HAI) from contaminated surfaces increases 100% when the previous room occupant had been diagnosed with an infection.
Related Links:
Xenex
The Xenex (San Antonio, TX, USA) LightStrike Germ-Zapping Robot uses a bulb filled with xenon gas to create intense germicidal UV light with an extensive range that includes both UV-B (280-315nm) and UV-C (200-280nm), and at an intensity thousands of times higher than mercury bulbs. The continuous UV light reduces microbial load in as little as five minutes, including methicillin-resistant Staphylococcus aureus (MRSA), Clostridium difficile, vancomycin-resistant Enterococcus (VRE), and other organisms. The robot has also been shown to reduce surgical site infection (SSI) rates.
Features include an impact resistant shell and four castors for portability; a telescopic mechanism to raise the xenon-filled bulb from its protective casing before use; a triple sensor motion detection cone to identify people are in the room, enhancing patient and staff safety; a simple user interface with auto-updating software for new features; cloud-based reporting over cellular or Wi-Fi networks; and extreme durability and reliability. After use, the room will remain disinfected until new pathogens enter the room from a visitor, patient, care provider, or the air handling system.
“A mercury light bulb is about the average intensity of a fluorescent light. Ours is 400 to 1,400 times more intense, depending on where the disinfecting spectrum is. The answer is, intensity makes all the difference,” said Morris Miller, CEO of Xenex. “It’s the difference between a hose and a power washer. A hose will put out a lot more water; but a power washer, at 18,000 pounds per square inch, will clean your sidewalk in the way that a hose won’t.”
Increasing evidence confirms that Clostridium difficile, MRSA, VRE, Acinetobacter baumannii, and influenza are transmitted via environmental surfaces, and that only 50% of environmental surfaces in a typical operating room or patient room may be effectively disinfected. The current patient’s risk of contracting a hospital acquired infection (HAI) from contaminated surfaces increases 100% when the previous room occupant had been diagnosed with an infection.
Related Links:
Xenex
Latest Critical Care News
- Wheeze-Counting Wearable Device Monitors Patient's Breathing In Real Time
- Wearable Multiplex Biosensors Could Revolutionize COPD Management
- New Low-Energy Defibrillation Method Controls Cardiac Arrhythmias
- New Machine Learning Models Help Predict Heart Disease Risk in Women
- Deep-Learning Model Predicts Arrhythmia 30 Minutes before Onset
- Breakthrough Technology Combines Detection and Treatment of Nerve-Related Disorders in Single Procedure
- Plasma Irradiation Promotes Faster Bone Healing
- New Device Treats Acute Kidney Injury from Sepsis
- Study Confirms Safety of DCB-Only Strategy for Treating De Novo Left Main Coronary Artery Disease
- Revascularization Improves Quality of Life for Patients with Chronic Limb Threatening Ischemia
- AI-Driven Prediction Models Accurately Predict Critical Care Patient Deterioration
- Preventive PCI for High-Risk Coronary Plaques Reduces Cardiac Events
- AI Diagnostic Tool Guides Rapid Diagnosis and Prediction of Sepsis
- World's First AI-Powered Sepsis Alert System Detects Sepsis in One Minute
- Smartphone Magnetometer Uses Magnetized Hydrogel to Measure Biomarkers for Disease Diagnosis
- New Technology to Revolutionize Valvular Heart Disease Care