Continuous Fetal Monitor Could Prevent Millions of Stillbirths
By HospiMedica International staff writers Posted on 21 Aug 2019 |
A new study indicates that commercially available inertial sensors could potentially extract fetal heart rate (FHR) continuously and noninvasively.
Under development at the Stevens Institute of Technology (Hoboken, NJ, USA) and New York University (NYU, USA), the new FHR monitor is based on seismo-cardiogram (SCG) and gyro-cardiogram (GCG) recordings collected from inertial sensors that are currently used to re-orient displayed images on a smartphone when it is rotated to a horizontal or vertical position. The monitor is based on a setup that picked up signals from inertial sensors placed at three points on the mother’s abdomen, and then extracts FHR from a fused cepstrum of recordings from all the sensors.
The novel monitor was evaluated with experiments on ten pregnant women under supine, seated, and standing positions, with the results compared to simultaneously recorded fetal cardiotocography (fCTG) readings, which are based on Doppler ultrasound. When matching the two modalities, the reliability was found to be quite comparable, with the supine position showing the highest correlation. A further advantage is that the monitor measures fetal movements without the mother’s active participation. The researchers claim that being able to assess both FHR and movement at the same time could help rule out fetal distress. The study was published on July 24, 2019, in IEEE Sensors Journal.
“Almost one-third of stillbirths occur in the absence of complicating factors; our device could let a pregnant woman know if her fetus is compromised and she needs to go to the doctor,” said senior author Negar Tavassolian, PhD, of the Stevens Institute of Technology. “Wearable inertial sensors could potentially be used to extract FHR outside the clinic, with accuracy and reliability metrics comparable to other modalities, such as fCTG. Our monitors are also completely passive, so there's no health concern.”
A normal FHR usually ranges from 120 to 160 beats per minute (bpm) in the in-utero period. It is measurable sonographically from around six weeks and the normal range varies during gestation, increasing to around 170 bpm at 10 weeks and decreasing from then to around 130 bpm at term.
Related Links:
Stevens Institute of Technology
New York University
Under development at the Stevens Institute of Technology (Hoboken, NJ, USA) and New York University (NYU, USA), the new FHR monitor is based on seismo-cardiogram (SCG) and gyro-cardiogram (GCG) recordings collected from inertial sensors that are currently used to re-orient displayed images on a smartphone when it is rotated to a horizontal or vertical position. The monitor is based on a setup that picked up signals from inertial sensors placed at three points on the mother’s abdomen, and then extracts FHR from a fused cepstrum of recordings from all the sensors.
The novel monitor was evaluated with experiments on ten pregnant women under supine, seated, and standing positions, with the results compared to simultaneously recorded fetal cardiotocography (fCTG) readings, which are based on Doppler ultrasound. When matching the two modalities, the reliability was found to be quite comparable, with the supine position showing the highest correlation. A further advantage is that the monitor measures fetal movements without the mother’s active participation. The researchers claim that being able to assess both FHR and movement at the same time could help rule out fetal distress. The study was published on July 24, 2019, in IEEE Sensors Journal.
“Almost one-third of stillbirths occur in the absence of complicating factors; our device could let a pregnant woman know if her fetus is compromised and she needs to go to the doctor,” said senior author Negar Tavassolian, PhD, of the Stevens Institute of Technology. “Wearable inertial sensors could potentially be used to extract FHR outside the clinic, with accuracy and reliability metrics comparable to other modalities, such as fCTG. Our monitors are also completely passive, so there's no health concern.”
A normal FHR usually ranges from 120 to 160 beats per minute (bpm) in the in-utero period. It is measurable sonographically from around six weeks and the normal range varies during gestation, increasing to around 170 bpm at 10 weeks and decreasing from then to around 130 bpm at term.
Related Links:
Stevens Institute of Technology
New York University
Latest Patient Care News
- First-Of-Its-Kind Portable Germicidal Light Technology Disinfects High-Touch Clinical Surfaces in Seconds
- Surgical Capacity Optimization Solution Helps Hospitals Boost OR Utilization
- Game-Changing Innovation in Surgical Instrument Sterilization Significantly Improves OR Throughput
- Next Gen ICU Bed to Help Address Complex Critical Care Needs
- Groundbreaking AI-Powered UV-C Disinfection Technology Redefines Infection Control Landscape
- Clean Hospitals Can Reduce Antibiotic Resistance, Save Lives
- Smart Hospital Beds Improve Accuracy of Medical Diagnosis
- New Fast Endoscope Drying System Improves Productivity and Traceability
- World’s First Automated Endoscope Cleaner Fights Antimicrobial Resistance
- Portable High-Capacity Digital Stretcher Scales Provide Precision Weighing for Patients in ER
- Portable Clinical Scale with Remote Indicator Allows for Flexible Patient Weighing Use
- Innovative and Highly Customizable Medical Carts Offer Unlimited Configuration Possibilities
- Biomolecular Wound Healing Film Adheres to Sensitive Tissue and Releases Active Ingredients
- Wearable Health Tech Could Measure Gases Released From Skin to Monitor Metabolic Diseases
- Wearable Cardioverter Defibrillator System Protects Patients at Risk of Sudden Cardiac Arrest
- World's First AI-Ready Infrasound Stethoscope Listens to Bodily Sounds Not Audible to Human Ear